GUID-FF2C2148-C40B-480A-A5A1-6DC33A780C79
1. Indicator light for the implement signal connector
When the indicator light for the implement signal connector is lit green, the
implement signal system is working normally. If light is blinking there is an error in
the system.
3.20.2 Resetting the implement signal connection
If the indicator light for implement signal connection (extra equipment) blinks, the
system is in error mode and the connection must be reset.
GUID-FF2C2148-C40B-480A-A5A1-6DC33A780C79
1. Indicator light for implement signal connection
1. Stop the tractor.
2. Turn off the power.
3. Turn on the power.
4. Start the tractor.
5. If the indicator light continues to blink, contact an authorised Valtra workshop.
3. Operation
- 268 -
To Next Page
Loading...
