DANGER: When using the U-Pilot, the functions of a programme start
automatically. Ensure that nobody is in the hazard area.
CAUTION: The switches do not show the equipment status when
using the U-Pilot.
3.19.1 U-Pilot operating requirements
For the U-Pilot to work properly, certain requirements have to be met.
• The driving speed must be 0.5-20 km/h (tractor must move even if the
distance unit is time).
• The maximum amount of operations for one programme is 30.
• The maximum distance for an operation cycle is 100 m without a pause.
• The maximum distance between the starts of two consecutive functions is
63.5 m.
• The distance is measured with the accuracy of 0.5 m. The minimum distance
between different functions is 0.5 m even if the function switches were
pressed within a shorter distance.
• The maximum length of a pause is 5 minutes.
• The maximum amount of programmes is 30.
3.19.2 U-Pilot controls
GUID-FC110209-ECC5-49C0-B1B4-65D4B03FBCC2
1. Activation / recording button 1 for U-Pilot
2. Activation / recording button 2 for U-Pilot
3. U-Pilot on/off button
3. Operation
- 250 -
To Next Page
Loading...
Need help?
General
