Valtra T series Versu

3.12.16.2 Editing counters
In the editing counters view, you can change the functions which trigger the
counting.
1. Enter the editing counters view.
• To enter the editing counters view from the split drive view, press the OK
button until the view is changed.
OR
• Press ESC.
• Navigate to the menu 3 with the up and down arrow buttons.
• Press the right arrow button in the menu 3 to enter the editing counters
view.
2. Select the function to be changed with the up and down arrow buttons.
000
000
000
000
440
cm
01:32
13,2
3,7
137,7
h
km
ha
l
000
000
000
000
440
cm
01:32
13.2
3.70
137
h
km
ha
l
000
1
GUID-A647B74A-4C23-4F5F-B26C-171605A31730
1. Selected function
3. Press OK button or the selector for the predefined factory/user settings.
4. Select the new function with the up and down arrow buttons or by rotating the
selector for the predefined factory/user settings.
5. Press OK button or the selector for the predefined factory/user settings to
return to the editing counters view main level.
With a short press of the ESC button you can return to the menu 3. A long press
of the ESC button returns to the previously active drive display.
3.12.16.3 Resetting counters
1. Enter the editing counter view.
• To enter the editing counter view from the split drive view, press the OK
button until the view is changed.
OR
• Press ESC.
• Navigate to the menu 3 with the up and down arrow buttons.
• Press the right arrow button in the menu 3 to enter the editing counters
view.
3. Operation
- 179 -