Valtra T series Versu

6.9.5 Rear power take-off
6.9.5.1 Rear power take-off alternatives
Power take-off
(PTO)
alternatives
T144
T154 T174E T194 T214 T234
540/1000 x x x x x x
540/540E/
1000
x x x x x x
540E/
1000/1000E
x x x x x x
540E/1000
+GSPTO
1)
x x x x x x
540E/1000E
+GSPTO
1)
x x x x x x
1)
Ground speed PTO
6.9.5.2 Rear power take-off ratios
Rear power take-off (PTO) ratios 540 rpm at engine speed 1 890 rpm
1 000 rpm at engine speed 1 897 rpm
540 E = 540 rpm at engine speed 1 522 rpm
1000 E = 1000 rpm at engine speed 1 677 rpm
6.9.5.3 Rear power take-off shafts
As a standard, the tractor is equipped with one power take-off shaft. Additional
shafts are extra equipment.
Splines
Standard Shaft diameter (mm)
6 splines
1)
ISO 500, type 1 35
21 splines ISO 500, type 2 35
20 splines ISO 500, type 3 45
6 splines No standard 45
1)
Standard
6.9.5.4 Lower link end distance from rear power take-off shaft
The length of the lower links (mm)
Width of implement attachment (T measure, mm)
Cat. 2 Cat. 3
990 738 723
6. Technical specifications
- 428 -