Adjust the speed limit as low as it is possible without disturbing your
work. A high speed limit reduces the effect of this safety feature.
If the joystick is deactivated by this function, you have to activate the joystick
functions selector again to use the joystick.
The auxiliary hydraulic control's safety time out symbol
flashes on the
tractor terminal display approximately 30 seconds before the joystick is
deactivated by the auxiliary hydraulic control's safety time out function. The
symbol is lit continuously on the tractor terminal display when the auxiliary
hydraulic controls are disabled.
3.15.2.2 Adjusting the auxiliary hydraulic control's safety time out speed limit
You can adjust the auxiliary hydraulic control's safety time out speed limit through
the tractor terminal transmission settings.
GUID-7F4381A4-57A7-4DC9-804D-435E28E53381
1. Auxiliary hydraulic control's safety time out adjustment
1. Press ESC button.
2. Navigate to the menu 2 with the up and down arrow buttons.
3. Press the right arrow button to enter the transmission settings view.
NOTE: When the power shuttle lever is in the parking brake position (P), you
can enter the transmission settings view by pressing the preprogramming
button.
4. Move the navigation box to the auxiliary hydraulic control's safety time out
adjustment with the arrow buttons.
A short press moves the box in the selected direction one field at a time. A
long press moves the box in the selected direction continuously.
5. Press the right arrow button.
3. Operation
- 219 -
To Next Page
Loading...
Need help?
General
