3.8.6 Clutch pedal
3.8.6.1 Using the clutch pedal while driving
GUID-02D21C15-7DD6-43EE-83D8-AADEFEE7CC46
1. Clutch pedal
1. Press the clutch pedal to release the traction.
2. Let the clutch pedal up gradually.
NOTE: Never rest your foot on the clutch pedal while driving.
NOTE: Do not allow the clutch to slip more than necessary when moving off.
3. Do not fully press the clutch pedal if you want the tractor to move very slowly.
You can use this feature when attaching implements.
NOTE: When using the clutch to move the tractor very slowly, the coupling
point of the clutch may change and the clutch engages sooner.
WARNING: If the engine stops while the tractor is moving (for
example, the fuel has run out), do not press the clutch pedal down.
When the tractor is moving and the transmission is engaged, the
engine is running and there is pressure in the system. If you press
down the clutch pedal, the hydraulic pump does not run and steering
deactivates, because there is no hydraulic pressure in the system.
WARNING: Do not descend slopes with the clutch pedal pressed
down.
3.8.6.2 Adjusting the clutch pedal engagement position
You can adjust the clutch pedal's engagement position and clutch slipping
properties according to your preferences through the tractor terminal
transmission settings.
The index determines how quickly the clutch engages when the clutch pedal is
raised. The value range is between 1…4.
• 1 = the clutch engages quickly, the engagement point is relatively low.
• 4 = the clutch engages slowly, the engagement point is relatively high.
3. Operation
- 96 -
To Next Page
Loading...
Need help?
General
