5. Move the navigation box to the rear PTO engagement adjustment position
with the up and down arrow buttons or by rotating the selector for the
predefined factory/user settings.
SET
1
2
3
4
4
1600 RPM 2000 RPM
2
F/R
START
F
R
C D
AUTO
AUTO 2
GUID-9F6859A5-AD05-422F-9BE0-3419747F613C
1. Rear PTO engagement adjustment
6. Press the right arrow button, OK button or the selector for the predefined
factory/user settings.
7. Set the rear PTO engagement value with the up or down arrow button or by
rotating the selector for the predefined factory/user settings.
The value range is between 0–5, where:
• 0 is for light or normal implements (factory setting).
• 5 is for heavy implements.
The new value is activated. You cannot restore the previous settings.
8. Press the left arrow button or selector for the predefined factory/user settings
to return to the transmission settings view main level.
With a short press of the ESC button you can return to the menu 2. A long press
of the ESC button returns to the previously active drive display.
3. Operation
- 247 -
To Next Page
Loading...
