34 D-302756
7.
Here you enter the IP address of the IP receiver that is located in the 1
st
Monitoring Station.
8.
Enter the IP address of the first IP receiver (for further details see the
table at the end of this section).
9.
10.
Here you enter the IP address of the IP receiver that is located in the 2
nd
Monitoring Station.
11.
Enter the IP address of the second IP receiver (for further details see the
table at the end of this section).
12.
13.
Here you enter the telephone number of the SMS receiver that is located
in the 1
st
Monitoring Station.
14.
Enter the telephone number of the first SMS receiver (for further details
see the table at the end of this section).
15.
16.
Here you enter the telephone number of the SMS receiver that is located
in the 2
nd
Monitoring Station.
17.
Enter the telephone number of the second SMS receiver (for further
details see the table at the end of this section).
18.
You can now press the button to take you to the "
PSTN RPRT
FORMAT
" menu, or press the button to take you to "
<OK> TO
EXIT
".
Compatible Monitoring Station receivers are:
Osborne-Hoffman model 2000, Ademco Model 685, FBII Model CP220, Radionics Model D6500, Sur-
Gard Model SG-MLR2-DG and Silent Knight Model 9500.
IMPORTANT: In telephone number locations and account number locations, you may be required to enter
hexadecimal digits. In telephone number locations, these digits are used as codes to control the dialer:
SMS RCVR2
SMS RCVR2
SMS RCVR1
SMS RCVR1
IP RCVR 2
000.000.000.000
IP RCVR 2
IP RCVR 1
IP RCVR 1
000.000.000.000
PSTN/GSM RCVR 2
To Next Page
Loading...
Need help?
General
