Wacker Neuson RD40 User Manual

Maintenance
Drive unit/diesel engine
BA RD40_RD45 en 00
133
The engine oil change may only be performed by trained, skilled
personnel with suitable workshop equipment.
Before each engine oil change, a service park regeneration must be
successfully performed with the SERDIA service tool.
Then allow machine to cool down less than 30 °C (86 °F). Do not
change the engine oil until this has been done.
The entries for the number and total duration of park regenerations
is reset in the memory of the engine control unit with the SERDIA
service tool.
4.03.03 Maintenance points on the diesel engine when changing oil
For engine maintenance, see the operating manual for the
diesel engine.
# Only lubricants with this symbol are permitted ("Technical data",
page 162 onwards).
1 2
3
[1] Engine oil dipstick [2] Filling opening for engine oil
[3] Drain outlet for engine oil
4.03.04 Replacing the filter insert of the fuel pump
5
5
1
2
3
4

Wacker Neuson RD40 Specifications

General

Brand	Wacker Neuson
Model	RD40
Category	Construction Equipment
Language	English