Operation
Switching the signal horn and lighting on and off
76
BA RD40_RD45 en 00
3.10 Switching the signal horn and lighting on and off
When the lights are set to on for a longer period of time
although the engine is stopped, the battery will be discharged
quickly.
Actuating signal horn
Requirement: Electrical system is ON.
Press the signal horn switch [3].
a
A short acoustic signal sounds when a fault is detected.
Switching the hazard warning lights on and off
Press switch [5].
a
Switch [5] flashes: The hazard warning light is switched on.
Press switch [5] again.
a
Switch [5] is not lit up: The hazard warning light is switched off.
Signalling left/right
Prerequisite: The electrical system is ON.
Press switch [1] for signalling left.
Press switch [2] for signalling right.
a
The relevant switch [1/2] flashes: The turn signal light is switched on.
Press switch [1/2] again.
a
Switch [1/2] is not lit up: The turn signal light is switched off.
If the light bulb in one of the direction indicators is defective,
the indicator lights/switches flash rapidly. To guarantee road
safety, the defective light bulb must be replaced.
Switching the parking light on and off
Prerequisite: The electrical system is OFF.
Press switch [7].
a
Switch [7] lights up: The parking light is switched on.
To Next Page
Loading...
Need help?
General
