Wacker Neuson RD40 User Manual

Operation
Adjusting scrapers
98
BA RD40_RD45 en 00
3.20 Adjusting scrapers
The scrapers remove dirt adhering to the surfaces of the drums/tyres.
For transport driving, move the scrapers away from the drums/tyres. This
prevents premature wear.
Rinse out dirt embedded between drums/tyres and scrapers
with a water jet. Remove any extremely stubborn dirt with a
spatula or similar tool.
CAUTION
Spring mechanism under tension!
Injury when caught and pinched.
■
Do not put your hands or fingers between scraper and roller drum/
tyre when applying or lifting off the scrapers.
3.20.01 Top drum scraper
1
2
Attach scraper
Switch off diesel engine and remove ignition key.
Turn stop lever [1] to I position.
a
The scraper folds down to the roller drum/tyre.
Moving the scraper away
Switch off diesel engine and remove ignition key.
Turn stop lever [1] to 0 position.
Lift the scraper bracket [2] until the catch latches in.

Wacker Neuson RD40 Specifications

General

Brand	Wacker Neuson
Model	RD40
Category	Construction Equipment
Language	English