Wacker Neuson RD40 User Manual

Maintenance
Transmission
150
BA RD40_RD45 en 00
Lubricate the guide bolt of the locking lever with oil at positions [2].
Move the locking lever to and fro several times between positions 0
and I to distribute the lubricant in the guide.
4.06.06 Check that wheel nuts/wheel bolt connections are tight
Switch off diesel engine and remove ignition key.
Tighten the wheel nuts/wheel bolts crosswise. For tightening torque
see Technical data (see page 171).
4.06.07 Checking air pressure in the tyres
WARNING
Explosion!
Severe injury and death due to explosion and moving parts.
■
Change damaged tyres.
■
When filling, do not exceed the values of the specified air pressure.
■
Use only suitable filling devices with a pressure indicator.
■
When filling the tyres, be always next to the tyre, not in front of it.
■
Use a tyre cage.
1
1
Visually inspect the tyre pressure daily.
a
There is no visible air shortage: The machine is ready for operation.

Wacker Neuson RD40 Specifications

General

Brand	Wacker Neuson
Model	RD40
Category	Construction Equipment
Language	English