Operation
Functional tests before starting work
BA RD40_RD45 en 00
65
3.03 Functional tests before starting work
Check the following to ensure safe operation of the machine:
Check Refer to
Can the machine be accessed safely? page 66
Has the driver's seat been adjusted? page 67
Has the seat belt been tested? page 69
Has the position of the seat been adjusted? page 67
Has the supply voltage been activated via the battery isolator switch? page 73
Are the turn signal and hazard warning lights working? page 76
Is the signal horn working? page 76
Are the lights working? page 76
Is the reversing warning system working? page 82
Is the rotating beacon working? page 77
Is the parking brake working? page 128
Is the EMERGENCY STOP working? page 127
Has the fuel tank fill level been checked? page 105
Has the coolant fill level been checked? page 139
Has the hydraulic oil tank fill level been checked? page 142
Has the water tank fill level been checked? page 155
Has the additive tank fill level been checked? page 155
Has the air pressure in the tyres been checked? page 150
Have the scrapers been checked? page 148
Has the engine hood been closed and locked? page 72
To Next Page
Loading...
Need help?
General
