Operation
Stopping the machine in normal operation
84
BA RD40_RD45 en 00
3.13 Stopping the machine in normal operation
Move the drive lever to the 0 position and let in snap in place.
Set the motor speed to idle (MIN).
a
The hydrostatic transmission brakes the machine to a standstill.
a
The parking brake has not been activated.
Activating the parking brake
Press the parking brake switch [1].
a
The parking brake is activated.
a
The parking brake switch [1] lights up.
The parking brake can only be released if the drive lever is
engaged in position 0.
To Next Page
Loading...
Need help?
General
