Tables
Technical data
162
BA RD40_RD45 en 00
5 TABLES
When working at the machine please always adhere to the
instructions given in your Safety instructions!
5.00 Technical data
5.00.01 Engine oil
NOTICE
Wrong engine oil!
Using the wrong engine oil damages the engine, increases wear,
lowers operational reliability and shortens the service life of the engine.
■
Use engine oil of the prescribed quality.
■
Choose engine oil with a viscosity suitable for the operating
temperature.
■
Change the engine oil at the specified intervals!
■
Do not mix different engine oils.
The lubricating oil quality (standard: API or ACEA) characterizes the
properties of the lubricating oil. Lubricating oils below the prescribed
quality limits must not be used.
In order to avoid damaging the engine, each lubricating oil must have the
viscosity suitable for its intended use.
Lubricating oil viscosity is classified in SAE viscosity grades. The
following diagram shows the SAE viscosity grades in relation to the
operating temperature.
Select the engine oil suitable for your operating temperature. Take
account of the SAE viscosity grades. Use multigrade oils for work in
widely ranging temperatures.
The cold starting ability of the engine can suffer if the temperature falls
below the limit for a short period.
To Next Page
Loading...
Need help?
General
