Operation
Switching the signal horn and lighting on and off
BA RD40_RD45 en 00
77
Press switch [7] again.
a
Switch [7] is not lit up: The parking light is switched off.
Switching the driving light on and off
Prerequisite: The electrical system is ON.
Press switch [7].
a
Switch [7] lights up: The driving light is switched on.
Press switch [7] again.
a
Switch [7] is not lit up: The driving light is switched off.
When it is set to on, the parking light will automatically change
to driving light as soon as the electrical system is set to on.
When it is set to on, the driving light will automatically change
to parking light as soon as the electrical system is switched off.
Switching the high beam on and off
The high beam switch [8] is not working.
Switching the work light on and off
Depending on the machine's configuration, the working light
can consist of various components, e.g.
■
front and/or rear working spotlights.
■
Drum edge lighting.
Prerequisite: The electrical system is ON.
Press switch [4].
a
Switch [4] lights up: The work light is switched on.
Press switch [4] again.
a
Switch [4] is not lit up: The work light is switched off.
Switching the rotating beacon on and off
Prerequisite: The electrical system is ON.
Press switch [6].
a
Switch [6] lights up: The rotating beacon is switched on.
Press switch [6] again.
a
Switch [6] is not lit up: The rotating beacon is switched off.
To Next Page
Loading...
Need help?
General
