Maintenance
Drive unit/diesel engine
BA RD40_RD45 en 00
141
Fill the compensation tank [1] with coolant until coolant flows out of
the bleed screw [5] on the radiator.
Tighten the bleed screw [5] on the radiator.
Fill the compensation tank with coolant until it reaches the MAX fill
level indicator [2].
Close the filling opening with the sealing cap [1].
Start the diesel engine and bring it to operating temperature
(thermostat opens).
Switch off the diesel engine and remove the ignition key.
Check the coolant level when the diesel engine is cold, fill up as
necessary.
Correct coolant level: Centre of fill level indicator [2] on the
compensation tank.
To Next Page
Loading...
Need help?
General
