Wacker Neuson RD40 User Manual

Maintenance
Water sprinkling
156
BA RD40_RD45 en 00
31
2
4
Prerequisites
■
Diesel engine off
■
Electrical system on
■
Parking brake activated
■
For water sprinkling: Drive lever in F position (forward)
Sprinkler nozzle check for water sprinkling
Press switch [1].
a
Water sprinkling is done by intermittent operation at the preset
interval level.
Press and hold the foot switch [2].
a
The water sprinkler will be active as long as the foot switch is being
pressed.
Press the switch [1] once again or release the foot switch [2].
a
Water sprinkling off.
Latch driving lever in position 0.
Switch off the electrical system.
Sprinkler nozzle check for additive sprinkling
Press and hold the switch [3] or foot switch [4].
a
The additive sprinkler will be active as long as one of the switches is
pressed and held.
Release switch [3] or [4].
a
Additive sprinkling turned off.
Latch driving lever in position 0.
Switch off the electrical system.
If the sprinkler does not work or does not produce the desired
sprinkling pattern, the sprinkler nozzles need to be cleaned.

Wacker Neuson RD40 Specifications

General

Brand	Wacker Neuson
Model	RD40
Category	Construction Equipment
Language	English