Operation
Loading and transporting
58
BA RD40_RD45 en 00
■
Drive the roller slowly and carefully from the loading area.
■
For crane loading, always attach appropriate sling equipment at the
lifting lugs provided for them. The crane vehicle must be positioned
on flat ground providing the bearing capacity required while observing
all relevant safety regulations. In addition, take suitable precautions
to block access to the lifting area in order to prevent any person from
moving or staying within the danger zone. The crane's load table
must correspond to the machine to be lifted. No crane loading must
be performed unless all these items have been complied with.
To Next Page
Loading...
Need help?
General
