Operation
Driving with the dynamic compaction system
BA RD40_RD45 en 00
91
Preparing for working with dynamic compaction system
Requirement: Electrical system ON
Selecting manual operating mode
Press switch [1].
a
LED Manual lights up green.
a
Use the switch [6] at the drive lever to set the dynamic compaction
system to ON or OFF.
Selecting automatic operating mode
Press switch [1].
a
LED Automatic lights up green.
a
The dynamic compaction system is switched on/off automatically
depending on the vehicle speed. The dynamic compaction system is
switched off when at low or high speed.
Always preset manual mode when restarting the machine.
Preselecting the drum
The dynamic compression system for the drums can be operated both in
combination and individually for each drum.
Press the switch [2].
a
The indicator LED [3] for the preselected drums light up green
(compaction system deactivated).
Pressing the switch [2] multiple times can select or deselect the drums
individually or in combination.
Activating/deactivating the compaction system
Activating the drum
Press the switch [4] several times.
a
The symbol [5] for the preselected drum lights up and indicates the
activated compaction system:
■
Vibration with large amplitude or
■
Vibration with small amplitude or
■
Oscillation.
a
The selected drum or drums is/are ready for operation with vibration/
oscillation.
The opportunities available for activation depend on the
configuration of your machine:
■
V: Front and/or rear vibration.
■
O: Rear oscillation.
■
T: Rear tyres (no dynamic compaction).
Setting drum in vibration
Requirement: Diesel engine is running.
Press switch at drive lever [6].
a
In accordance with the settings, the compaction system works
immediately (manual) or when driving starts (automatic).
To Next Page
Loading...
Need help?
General
