Weiler E1650 - Page 171

WEILER E1650 REMIXING TRANSFER VEHICLE
Machine Safety 1-1
Machine Shutdown Procedure 3-13
Machine Starting Procedure 3-7
Machine Terminology 2-2
Main Operator Station 2-3
Maintenance 5-1
Maintenance Procedures 5-7
Maintenance Schedule 5-6
Mounting and Dismounting 3-6
N
Neutral Start Interlocks - Test 5-39
O
Operating Instructions 3-1
Operator Qualifications 3-1
Operator Station Setup 3-15
Other Controls 2-19
Overall Machine - Check 5-40
P
Paving 3-19
Dump Hopper 3-19
Personal Protection 3-2
Personal Safety 1-1
Prepare the Area 3-4
Preparing For Storage 5-49
Preparing Machine 3-15
Pre-Starting Inspection (Before Each Use) 3-6
Pump Drive Gearbox - Drain / Refill 5-40
Pump Drive Oil - Check 5-41
R
Receiving and Delivery Report ii
Removing From Storage 5-49
Right Control Panel 2-7
Roading Machine 4-1
S
Safety Messages 1-1, 5-1
Safety Signs 5-3
Explanations 1-9
Inspect 1-6
Locations 1-7, 1-8
Safety Signs - Check / Clean 5-41
Schematics C-1
Electrical Schematic C-1
Hydraulic Schematic C-5
Slope Operation Safety 3-5
Specifications A-1
Dimensions A-1
Engine Specifications A-3
Hydraulic System A-5
Lubricants A-4
Performance A-2
Wheels A-2
Spray Down Filters - Check / Clean 5-42
Spray Down Tank - Fill 5-43
Sprockets - Inspect 5-44
Storage 5-49
Storage Conveyor Chain Tension - Adjust 5-20
Storage Conveyor Chain Tension - Check 5-19
T
Tires - Check Pressure 5-47
Toggle Switches - Check 5-47
Towing/Retrieving Machine 4-3
Trailering the Machine 4-5
Transporting 4-1
Limp Mode 4-2
Towing/Retrieving Machine 4-3
Trailering the Machine 4-5
Truck Signal Lights (Optional) 3-26
W
Welding Precautions 5-4
Wheel Lug Bolts - Check / Torque 5-48
Wheel Planetary Oil - Check 5-48
Wheel Planetary Oil Level - Drain / Refill 5-48