Saving Total Presets
PEGASUS WING User Manual
46
7. Saving User TOTAL PRESETS
You can now safely and permanently save all the settings so far
undertaken as a new USER Total Preset to be later recalled for your
music making with a minimum of button pressing.
7.1. Check List for USER Total Presets
The following list might help to indicate whether you have thought of all the settings’
possibilities. Of course, not all the possible functions have to be specially set or changed!
7.1.1. Sound/Instruments
• Sounds selected for the manuals and optional pedals
• Separate playing areas switched On/Off.
• Volume and octave positions set in all active areas
• Controls settings such as dynamics, reverberation intensity, panorama etc.
All these settings are described in Chapter 10:“Controls” – starting at page 53
• WersiChord Type setting and activation
• Split point setting and activation of the split function
• Transposer setting
• Your drawbar sounds set with the control panel buttons in the Drawbars section and the
drawbar settings. See also 6.5 Drawbars.
7.1.2. Accompaniment
• Accompaniment/Styles selected
• Tempo and/or Tempomat activated
• Required Accompaniment Chord mode selected
• StartVariation or Intro Start and/or Synchron Start
• Volumes and/or muting of accompaniment tracks
• Acc On/Off, Auto Bass, Auto Break, Auto Fill, Auto Variation
7.1.3. Effects
• Reverberation type for manuals and pedals
• Overall sound
All these settings are described in Chapter 9: “Effects” - starting at page 51
7.1.4. Other Settings
• Swell pedal setting (Acc Volumes)
• Footswitch functions for LEFT + RIGHT and for the 5 other foot buttons of the optional foot
switch board
All these settings are described in Chapter 12.1.5 “Swell Pedal and Accompaniment” -
starting at page 63.
Of course, you can also save a WERSI(=W=Werks) Total Preset – modified by you – as
a new USER(=B)/User Total Preset!
To Next Page
Loading...
Need help?
General
