Settings
PEGASUS WING User Manual
62
Select from the list your preferred dynamic setting:
o Little Dynamic
( = the full dynamic is achieved with a light touch)
o Middle Dynamic
o Normal Dynamic
o Soft Dynamic
o Hard Dynamic
( = the full dynamic is achieved only with a heavy touch)
the selection assumes a blue background
the selected dynamic appears above
Tap here to close the list.
You can only turn off the Touch Sensitivity function completely by tapping the Controls
button. The lamp then goes out.
12.1.4. Accompaniment
You can set the accompaniment properties by following the guidelines given here.
Press one of these buttons to set one of the functions for the accompaniment.
the selected box and its function are then activiated and shown in orange .
12.1.4.1. Auto Break
Function on = When you change the Acc Variation a BREAK is inserted, then the newly
selected Acc Variation starts
12.1.4.2. Auto Fill
Function on = When you change the Acc Variation the corresponding Fill for that Style is
inserted then the newly selected Acc Variation starts.
This function does not apply to all factory Styles because they do not all
have 4 variation fills.
12.1.4.3. Auto Variation
Function on = The next higher numbered Acc Variation is always brought in after a break has
been activated.
To Next Page
Loading...
Need help?
General
