WinGD X72-B - Group 9 - Monitoring Instruments Crank Angle Sensor Unit

5.9 Group 9 - Monitoring instruments
5.9.1 Crank angle sensor unit
The crank angle sensor unit is installed on the supply unit drive at the driving end.
There are two crank angle systems that monitor the teeth on the intermediate wheel. The two sets
of proximity sensors operate independently to sense the teeth on the intermediate wheel (002).
X72-B
AA00-9223-00AAA-043A-A
Operation Manual Crank angle sensor unit
Winterthur Gas & Diesel Ltd.
- 220 - Issue 003 2021-12