18 Remove the chain block (002), the chain (003) and the shackle (004).
19 Operate the turning gear and the chain block (001) to move the connecting rod
clockwise to the position shown in view B.
20 Attach the lever chain hoists (005, 007) to the lifting tool on the connecting rod (006) as
shown in view C.
21 Remove the chain block (001).
22 Operate the turning gear and the lever chain hoists (005, 007) to move the connecting
rod clockwise into the position shown in view D.
X72DF
AA00-3303-00AAA-720A-A
Maintenance Manual Connecting rod - install
Winterthur Gas & Diesel Ltd.
- 437 - Issue 002 2020-10
To Next Page
Loading...
