5 Use the two jacking screws to lift the fuel pump until the pin disengages.
6 Attach the cover to the pump cover (005).
7 Use the applicable lifting equipment to lift and move the fuel pump.
8 Move the fuel pump to an applicable work bench.
9 Put the fuel pump on its side on the wooden surface. Make sure that you do not cause
damage to the toothed rack (008) or and the roller (007).
10 Remove the lifting equipment from the fuel pump.
CLOSE UP
• None
X72DF
AA00-5556-00AAA-520A-A
Maintenance Manual Fuel pump - remove
Winterthur Gas & Diesel Ltd.
- 552 - Issue 002 2020-10
To Next Page
Loading...
