To Next Page

To Previous Page

INFORMATION

L3301, L3901, L4701, WSM

I-6

9Y1211012INI0003US0

CARE OF DANGER, WARNING AND CAUTION LABELS

1. Keep danger, warning and caution labels clean and free from obstructing material.

2. Clean danger, warning and caution labels with soap and water, dry with a soft cloth.

3. Replace damaged or missing danger, warning and caution labels with new labels.

4. If a component with danger, warning and caution label(s) affixed is replaced with new part, make sure new label(s)

is (are) attached in the same location(s) as the replace component.

5. Mount new danger, warning and caution labels by applying on a clean dry surface and pressing any bubbles to

outside edge.

9Y1211012INI0004US0

KiSC issued 09, 2016 A

wsm L3301 User Manual

Questions and Answers: