CLUTCH
L3301, L3901, L4701, WSM
2-S4
3. TIGHTENING TORQUES
Tightening torques of screws, bolts and nuts on the table below are especially specified.
(For general use screws, bolts and nuts: Refer to "5. TIGHTENING TORQUES" on page G-13.)
[L3301/L3901]
[L4701]
9Y1211012CLS0003US0
Item N·m kgf·m lbf·ft
Steering wheel mounting nut 48 to 55 4.9 to 5.7 36 to 41
Oil cooler return pipe bolt 92 to 101 9.0 to 10.0 67 to 73
Delivery pipe joint bolt 49 to 69 5.0 to 7.0 37 to 50
Release fork mounting screw 23.5 to 27.5 2.4 to 2.8 17.4 to 20.3
HST return pipe bolt 79.2 to 88.2 8.1 to 9.0 58.4 to 65.1
Delivery pipe mounting screw 18 to 20 1.8 to 2.0 13 to 15
Main delivery hose retaining nut 46.6 to 50.9 4.8 to 5.2 35 to 37
Turning delivery hoses retaining nut 24.5 to 29.4 2.5 to 3.0 18 to 21
Adjusting screw lock nut 16 to 21 1.6 to 2.2 12 to 15
Pressure plate 2 height adjusting screw lock nut 16 to 21 1.6 to 2.2 12 to 15
Item N·m kgf·m lbf·ft
Steering shaft universal joint bolt 23.5 to 27.4 2.4 to 2.8 17.3 to 20.2
Steering bearing flange bolt 23.5 to 27.4 2.4 to 2.8 17.3 to 20.2
Item N·m kgf·m lbf·ft
Engine and clutch housing mounting bolt and nut 77.5 to 90.2 7.9 to 9.2 58 to 66
To Next Page
Loading...
Need help?
General
