CLUTCH
L3301, L3901, L4701, WSM
2-S19
Power Steering Controller Hoses
1. Since identification tapes are not installed to the hoses, mark
the hoses as shown in the picture.
2. After marking, disconnect the left delivery hose (3) and the right
delivery hose (1).
9Y1211012CLS0010US0
Tightening torque
Main delivery hose
retaining nut
46.6 to 50.9 N·m
4.8 to 5.2 kgf·m
35 to 37 lbf·ft
Turning delivery hoses
retaining nut
24.5 to 29.4 N·m
2.5 to 3.0 kgf·m
18 to 21 lbf·ft
(1) Delivery Hose (R.H.)
(2) Return Hose
(3) Delivery Hose (L.H.)
(4) Main Delivery Hose
(5) Plug
(A) Steering controller viewing from
the bottom side
F: Front
M: Marking
To Next Page
