Xerox 4112 - Page 166

Setups
9-8 System Administration Guide
Xerox 4112/4127 Copier/Printer
NTP Time Synchronization
You can get the time from a time server (NTP: Network Time Protocol), to synchronize the
machine to the time server time.
1. From the Machine Clock/Timers screen, select NTP Time Synchronization, and select
Change Settings.
2. Select On or Off.
3. Select Save to save the settings and return to the previous window.
Connection Interval
Select the time interval at which a connection is made to the time server.
Select an interval from 1 to 500 hours, in steps of one hour.
1. From the Machine Clock/Timers screen, select Connection Interval, and select Change
Settings.
2. Enter the Connection Interval using the numeric keypad.
3. Select Save to save the settings and return to the previous window.
Downloaded From ManualsPrinter.com Manuals