Xerox 4112 System Administration Guide

Setups
Xerox 4112/4127 Copier/Printer 9-9
System Administration Guide
Time Server Address
This is used to enter the IP address for the time server.
Note
Set the NTP Time Synchronization to on.
1. From the Machine Clock/Timers screen, select Time Server Address and press Change
Settings.
2. Enter the IP address:
• IP Address: Set the IP address of the time server from which the time is obtained,
using values 0 to 255.
Note
• Addresses 244 to 255.XXX.XXX.XXX and 127.XXX.XXX.XXX cannot be set.
• Select Next to enter the next part of the IP address if the address between dots is less
than 3 digits.
3. Select Save to save the settings and return to the previous window.
Auto Clear
If a given time period elapses with no operation, the machine automatically returns to the
initial screen.
Set a period from 1 to 4 minutes, in intervals of 1 minute. To cancel the setting select C, or select
the Cancel button to delete any selections made on this screen.
Note
Even if Off is selected, any currently scanned and pending jobs continue processing after one
minute of inactivity on the machine.
Downloaded From ManualsPrinter.com Manuals

Xerox 4112 Specifications

General

Brand	Xerox
Model	4112
Category	All in One Printer
Language	English