Xerox 4112 - Page 189

Setups
Xerox 4112/4127 Copier/Printer 9-31
System Administration Guide
3. Select a Priority setting (First-Sixth) and assign a specific tray to that priority setting.
Note
Only one tray can be set to each priority.
4. Select Save to save the selections and return to the Paper Tray Priority screen.
5. Select Close to return to the Paper Tray Settings screen.
Paper Type Priority
Set the paper type priority sequence for automatic tray selection. Automatic tray selection
means that a tray containing the appropriate paper is automatically selected by the machine
for copying or printing.
You can select from a variety of paper types including bond paper, plain paper, recycled paper,
side 2 paper, etc.
Note
The paper type selections for this feature will vary depending on your machine and your work
environment requirements (such as the types of paper you use most frequently).
Note
The paper type setting takes precedence over the tray priority sequence. If different paper
types appear in the same priority sequence, the paper selection is determined by tray priority
sequence.
For information about the tray priority sequence, refer to Paper Tray Priority on page 9-30.
Downloaded From ManualsPrinter.com Manuals