Xerox 4112 - Page 207

Setups
Xerox 4112/4127 Copier/Printer 9-49
System Administration Guide
Note
The reference lengths for a sample output of A3 or A4 size printed with Sample Printout are as
follows.
2. Select X% or Y%, and press Change Settings.
3. Enter the offset amount of the X direction scale you measured in Step 1 for Side 1 and Side
2 of X%.
4. Enter the offset amount of the Y direction scale you measured in Step 1 for Side 1 and Side
2 of Y%.
Note
If the scale offset amount is positive, enter a negative value in the adjustment value field. If
negative, enter a positive value.
Paper Size
Image Reference Length in X
Direction
Image Reference Length in Y
Direction
A3 400 mm 277 mm
A4 190 mm 277 mm
Downloaded From ManualsPrinter.com Manuals