Xerox 4112 System Administration Guide

Setups
Xerox 4112/4127 Copier/Printer 9-61
System Administration Guide
3. Select the tray in which you loaded paper, and press the Start button.
An output sample is printed.
4. Press Close.
5. Check the output sample printout, and measure the offset amount.
6. Select Long at Left or Long at Right.
7. Enter the measurement value you obtained in Step 5 in Values A Before Adjustment field
by touching the up/down arrow buttons; refer to the screen above.
8. Press Adjust.
9. Press Sample Printout again to print an output sample printout, and check the adjustment
results.
10. Make adjustments again if necessary. (Steps 6 - 8)
11. Press Save.
Downloaded From ManualsPrinter.com Manuals

Xerox 4112 Specifications

General

Brand	Xerox
Model	4112
Category	All in One Printer
Language	English