Xerox 4112 System Administration Guide

Setups
Xerox 4112/4127 Copier/Printer 9-167
System Administration Guide
Note
For information about the method for confirm/change, refer to Add Address Book Entry on page
9-168.
• File Format: Specify the output file format.
• Resend Attempts: Select the number of e-mail resend attempts (1 - 5) and interval (30 -
300 seconds).
Details
Use the following procedure to check the content of a job flow and modify/copy/delete the
content.
1. Select a job flow, and select Edit/Delete.
2. Check the content.
3. Press the desired button.
• Delete: Deletes the selected job flow.
• Copy: This makes a copy of the selected job flow. From the copy of the job flow you
can create a new job flow.
Note
The method of creation is the same as when creating a new job flow. For more details, refer to
Create New Job Flow Sheet on page 9-162.
• Edit: Modify the selected job flow settings.
Downloaded From ManualsPrinter.com Manuals

Xerox 4112 Specifications

General

Brand	Xerox
Model	4112
Category	All in One Printer
Language	English