Xerox 4112 System Administration Guide

Options
Xerox 4112/4127 Copier/Printer 11-3
System Administration Guide
Digital Certificate
To enable a digital certificate (if needed):
1. Click the Properties tab.
2. Click the Security folder, then the Machine Digital Certificate Management link.
3. If prompted to login, type or enter your System Administrator user name and password:
•user name (default): 11111
• password (default): x-admin
4. Click the Create New Self Signed Certificate button. The Machine Digital Certificate
Management page refreshes and displays the Self -Signed Certificate area.
5. In the Self -Signed Certificate area, click Apply.
SSL
To enable SSL:
1. Click the Properties tab.
2. Click the Security folder, then the SSL/TLS Settings link.
3. If prompted, type or enter your System Administrator user name and password.
•user name (default): 11111
• password (default): x-admin
4. In the SSL/TLS Settings area, on the HTTP - SSL/TLS Communication line, click Enabled.
5. Click Apply.
Note
If changes are made to the SSL settings you may need to:
• Reboot the system.
• Close and reopen the client browser.
Ports
To enable the ports:
1. Click the Properties tab.
2. Click the Connectivity folder, then Port Settings.
3. On the SNMP line, click Enabled.
4. On the SMB line, click Enabled.
5. On the FTP Client line, click Enabled.
6. On the SOAP line, click Enabled.
7. Click Apply.
Note
If changes were made to the SSL settings you may need to reboot the system.
Downloaded From ManualsPrinter.com Manuals

Xerox 4112 Specifications

General

Brand	Xerox
Model	4112
Category	All in One Printer
Language	English