Xerox 4112 System Administration Guide

Using the Scan Service
5-4 System Administration Guide
Xerox 4112/4127 Copier/Printer
Link a job flow sheet to a folder
Set or change a link to a job flow, or select and run a job flow.
The procedure that follows describes how to register a folder on the machine.
1. Enter the System Administrator Mode (Chapter 1 Entering the System Administrator mode
on page 1-10.)
2. Select Setup Menu.
3. Select Create Folder.
4. Select a box to register and then select Create/Delete.
Downloaded From ManualsPrinter.com Manuals

Xerox 4112 Specifications

General

Brand	Xerox
Model	4112
Category	All in One Printer
Language	English