Product Overview Xerox 700 Digital Color Press
User Guide
1-4
1
2
Paper trays
For more feeding options, refer to the section later in this chapter entitled Optional accessories.
Paper Trays 1, 2, and 3
Trays 1, 2, and 3 are identical. Each tray has a capacity of 550
sheets of 20 lb./75 gsm paper. The trays are pulled out by the
operator for loading. The trays accommodate paper weights
from 64-300 gsm (18 lb. bond - 80 lb. cover) and are fully
adjustable for all stock sizes in the range 7.2 x 5.5 in./182 x 140
mm to 13 x 19.2 in./330 x 488 mm. All stock types (pre-
formatted paper, letterhead) can be used except for envelopes.
Stock can be loaded either long or short edge feed (portrait or
landscape).
Bypass Tray
The Bypass Tray is a paper tray on the left hand side of your machine and can be folded away when not in use. It
accommodates all types of stock in a range of sizes between 7.2 x 5.5 in./182 x 140 mm to 13 x 19.2 in./330 x
488 mm and has a capacity of approximately 250 sheets of 20 lb./75 gsm bond paper or a maximum stack
height of 0.4 in./10.16 mm. The tray accommodates paper of weights between 64-300 gsm (18 lb. bond - 80 lb.
cover). Stock can be loaded either long or short edge feed (portrait or landscape). When lowered, the Bypass Tray
can be extended to support longer length stock.
2.
1.
Finishing Options
Offset Catch Tray (OCT)
The OCT can hold up to 500 sheets of paper and allows each set or stack
to be offset from the previous to enable easy separation.
For more finishing options, refer to the section later in this chapter
entitled Optional accessories.
The OCT is equiped with cooling fans that prevent "blocking" (sticking
together) of the printed/copied output. The OCT fan can be adjusted
for various paper weights:
OFF for all paper types weighing 60-105 gsm.
4
1
2
3
1.
2.
3.
4.
One-quarter turn for Coated paper weighing 106-135 gsm.
At the mid/halfway position for Coated paper weighing 136-186
gsm.
ON 100% for Coated paper weighing 221-300 gsm.
Downloaded From ManualsPrinter.com Manuals