9-3
Specifications
User Guide
Xerox 700 Digital Color Press
Advanced Finisher
Top Tray capacity: 500 sheets•
Stacker Tray: 3000 sheets•
Paper weights: 52-216 gsm uncoated to Top and Stacker Trays; 217-280 gsm •
uncoated to Top Tray only
Stapling: 50-sheet, multi-position•
Hole Punching: 2- and 3-hole punch for USA and 2- and 4-hole punching for •
Europe
Top Tray capacity: 500 sheets•
Stacker Tray: 1500 sheets•
Paper weights: 52-216 gsm uncoated to Top and Stacker Trays; 217-280 gsm •
uncoated to Top Tray only
Stapling: 50-sheet, multi-position•
Hole Punching: 2- and 3-hole punch for USA and 2- and 4-hole punching for •
Europe
Booklet Tray:•
Professional Finisher (with
Booklet Maker)
Up to 20 sets accepted in the Booklet Tray•
Stapled: 15 sheets/set (up to 90 gsm of uncoated stock)•
Non-stapled: 5 sheets/set •
Bi-Fold: 1 sheet/set (up to 169 gsm of uncoated stock)•
Stackable number of sets depends on paper size•
Top Tray capacity: 500 sheets•
Stacker Tray Capacity: 5000 sheets•
Paper weights: 52-300 gsm uncoated; 105-220 gsm coated•
Paper sizes: 4 x 5.6 in./102 x 142 mm to 13 x 19 in./SRA3/330 x 488 mm to Top •
Tray; 7.2 x 10.5 in./182 x 257 mm to 13 x 19 in./SRA3/330 x 488 mm to Stacker
Tray
High Capacity Stacker
(HCS)
The Interface Module (IM) acts as a communication device and paper path between
the print engine and an optional finishing device such as the HCS or the Light
Production C Finisher (refer to next page for more information on this finisher). One IM
is required when using an optional HCS or optional Light Production C Finisher.
Interface Module
Optional finishin
accessories
Downloaded From ManualsPrinter.com Manuals