Xerox 700 Digital Color Press - Page 192

9-4
Specifications
User Guide
Xerox 700 Di
g
ital Color Press
Tray Type
Output Tray: Collated/Uncollated
Finisher Tray: Collated/Uncollated (Offset available)
Booklet Tray: Collated/Uncollated
Top Tray:
Maximum: A3, 12.6 x 19.2in. (330 x 488 mm)•
Minimum: A6 (postcards)•
Finisher Tray:
Maximum: 12.6 × 19.2 in. (330 x 488 mm)•
Minimum: B5•
Booklet Tray:
Maximum: A3/13 × 18 in.•
Minimum: A4/8.5 × 11 in.•
Supported Paper Size
Top Tray: 500 sheets
Finisher Tray: 2,000 sheets, 200 sets*
* When using A4 LEF, B5 LEF, 8.5 × 11 in. LEF, 8 x 10 in. LEF, 7.5 x 10.5 in. LEF only.
When using paper of other sizes, tray capacity is 1,500 sheets and 100 sets.
Booklet Tray: 20 sets
Tray may not support some paper types.
Tray Capacity
Maximum stapled sheets: 100 sheets
When using paper of size larger than A4 or 8.5 x 11 in., the maximum number •
of sheets that can be stapled is 65.
Staple nails may bend when using certain paper types.•
Paper size:
Maximum: A3/11 x 17 in. •
Minimum: B5 LEF•
Staple position:
1 location: (front: angled stapling, center: parallel stapling, back: parallel •
stapling*)
2 locations: (parallel stapling) •
Stapling (variable length)
Light Production C Finisher
Top Tray and Finisher Tray: 52 - 253 gsm
Booklet Tray: center binding 60 - 90 gsm, center folding 60 -105 gsm
NOTE: For covers, paper of up to 220 gsm is supported.
NOTE: If 91 -220 gsm paper is used for covers, the main Body of documents must use
60 - 80 gsm paper.
Supported Paper Weight
Downloaded From ManualsPrinter.com Manuals