Xerox 700 Digital Color Press - Image Quality

8-44 User Guide
Problem Solvin
g
Xerox 700 Di
g
ital Color Press
Access the Original Type screen by selecting the Image Quality tab.
Check that:
Dark Background
Access the Lighten/Darken control by selecting the General Settings tab.
Patterned, Mottled or
Grainy Background
The background of
your output is dirty,
gray, shadowed or has
a tint to it.
The background of
your output is moire,
has a rippled or digital
pattern, prints with
squares or small
blocks.
Using a lint-free cloth, lightly dampened with Xerox Anti-Static or General Cleaning Fluid or
another suitable non-abrasive glass cleaner, clean the
- Document Glass and
- Document Handler white underside.
Ensure that the Document Handler guides are against the edges of the loaded originals.
Access the Original Type screen by selecting the Image Quality tab.
Check that the Original Type, Photo is NOT selected.
Access the Sharpness/Color Saturation screen by selecting the Image Quality tab.
Open, then fully close the Document Handler.
Place original face down and to the rear left of the document glass. Place a sheet of blank
paper on top of the original.
Image Quality
Corrective ActionProblem
Downloaded From ManualsPrinter.com Manuals