Xerox 700 Digital Color Press - Replacing the Fuser

User Guide
7-14
Maintenance
Xerox 700 Di
g
ital Color Press
Close the Front Door. If the door will not close completely,
make sure the cartridge is in the lock position and the
toner cartridge is installed into the appropriate toner
location.
Remove the toner cartridge by holding the handle on the
top of the cartridge while gently pulling it straight out. Be
careful to not get toner on clothing.
Dispose the toner cartridge as normal office waste or
recycle the cartridge.
Remove the new toner cartridge from its packaging.
Gently tilt the new cartridge up and down, and then left
and right to redistribute the toner.
Install the toner cartridge by aligning the arrows on the
cartridge evenly with the printer until you hear a click.
That completes the procedure for replacing the toner
cartridge.
This procedure shows you how to remove a used Fuser and replace it with a new Fuser. The machine will tell you when
you need to install a new one. The Fuser can be recycled so please follow the disposal instructions you receive with the
new cartridge.
CAUTION:
Never use a vacuum cleaner when you clean spilled
toner. It can cause explosion as the toner fills the
vacuum cleaner and gets sparks. Use a broom or a cloth
moistened with a neutral detergent.
Replacin
g
the Fuser
3.
4.
5.
6.
7.
8.
Downloaded From ManualsPrinter.com Manuals