Xerox 700 Digital Color Press - Replacing the Charge Corotron

User Guide 7-17
Xerox 700 Digital Color Press
Maintenance
Close the Transfer module.
Insert the Fuser into the Transfer module while holding
the Amber-Gold handle.
Turn Handle #2 to the locked position.
Close the Front Door of the printer.
That completes the procedure for replacing the Fuser.
This procedure shows you how to remove the used Charge
Corotron and replace it with a new Charge Corotron. The
machine will tell you when you need to order a new one
and when to install it.
Replacin
g
the Char
g
e Corotron
8.
9.
10.
11.
Downloaded From ManualsPrinter.com Manuals