User Guide 3-17
PaperXerox 700 Digital Color Press
Loading paper into Tray 8 (Post-Process Inserter)
1.
The Post-Process Inserter is designed for loading paper that will be used as separators and covers. You cannot make
copies using the Post-Process Inserter media.
Remove any paper that remains loaded into the Inserter.
2.
Hold the center of the paper guides and slide them to the
desired paper size.
3.
Load the paper, aligning to the front side of the tray. If the
paper is preprinted, load the paper with the printed side
facing up and with the tab side to be fed first.
Downloaded From ManualsPrinter.com Manuals
To Next Page
Loading...
Need help?
General
