AddendumXerox 700 Digital Color Press
10-3User Guide
In Auto Decurler mode, appropriate decurl settings are selected from the Tools Mode on the UI by:
1. Logging on as Administrator
2. Pressing the Machine Status button.
3. Selecting the Tools tab
4. Selecting System Settings/Common Service Settings/Maintenance
5. Selecting Decurler Setup
The Manual Decurler mode has seven levels of curl correction available at the Interface Module Control Panel:
Three levels of Up-curl correction
Three levels of Down-curl correction, and•
A No correction level.•
The amount of curl correction is changed by selecting a related button. The current selected amount of curl correction
is displayed by the Control Panel LEDs.
Your system is also designed with several automated presettings for controlling paper curl. When using these settings,
the machine automatically sets the amount of curl correction at the Decurler. Therefore, if paper curl is a problem, use
one of the preset Decurler settings in order to eliminate the problem.
When the media passes through the decurler, you are notified of the current amount of curl correction by-way-of the
various LEDs on the Interface Module Control Panel. In addition to Auto Decurler mode, you can manually select curl
correction from the Interface Module Control Panel.
Auto Decurler
Manual Decurler
Preset Decurler settings
Downloaded From ManualsPrinter.com Manuals
To Next Page
Loading...
Need help?
General
