Xerox 700 Digital Color Press

User Guide 7-13
Xerox 700 Digital Color Press
Maintenance
Lay paper on the floor before removing the cartridge. This
will allow any excess toner to fall on the paper. Hold the
handle of the color indicated in the message, and gently
pull it out.
This procedure shows you how to remove a used toner cartridge and replace it with a new toner cartridge. The machine
will notify you when a new toner cartridge is needed, and when installation is to occur. If you continue copying or
printing without replacing the toner cartridge, a message will appear and the machine will stop after copying or
printing around 1,800 pages for Black, or around 1200 pages for Cyan, Magenta and Yellow.
Follow the disposal instructions for the old cartridge when you receive with the new cartridge.
Replace the toner cartridge while the machine is on. Open
the toner cover, located just above the machine front door.
Replacin
g
the Toner Cartrid
g
es
WARNING: Before you begin the procedure, ensure that the machine has been allowed to cool down. Failure to
do so may result in burns if certain parts of the machine are touched.
1.
2.
Downloaded From ManualsPrinter.com Manuals