8-22 User Guide
Problem Solvin
Xerox 700 Di
ital Color Press
If the fault is a paper jam, ensure that any paper is •
removed from the appropriate area and that there are no
hidden or small pieces of paper left behind.
Reboot your machine by powering OFF and ON using the •
On/Off button at the front of your machine.
Select a percentage for enlargement, or select the required •
paper tray and Auto % reduce/enlarge.
Check to see if Transparencies are selected on the • Paper
Type screen. The machine automatically adjusts for
different types of media; paper can tolerate more heat
than transparencies.
If appropriate, select the button after each selection on •
the touch screen.
Check to see if the paper tray guides are locked into •
position against the paper.
Check the power cord installation.•
Firmly press the • ON/OFF button.
Check to see if the AC outlet is receiving voltage. (Connect •
another appliance to the outlet to verify voltage.)
Message will not clear
8.5 x 11 in./A4 original was not enlarged ont
an 11 x 17 in./A3 page
o
Deformed transparencies
Output does not reflect the selections made
Output is not stacked correctly
The machine will not power
ON
Corrective ActionProblem
Problem Statements
Downloaded From ManualsPrinter.com Manuals
To Next Page
Loading...
