10-17User Guide
AddendumXerox 700 Digital Color Press
If power is interrupted to the HCS:
Ensure the power cord is plugged in to the proper wall receptacle•
Ensure that the machine power is switched “On”•
Ensure that the Ground Fault Indicator is in the "On" position•
If the power has not been restored by checking the above items, then call for service•
Loss of power
Paper guidelines
Specifications
Stacker Tray will accept 64-280 gsm (either coated or uncoated stock) with the possibility of degraded stock •
quality and increased jam rate
Transparencies may be run to either the Top Tray or the Stack Tray. Stack height should be limited to 100 •
transparencies.
Coated paper lighter than 100 gsm may not run as reliably as coated paper heavier than 100 gsm. •
Non-standard papers longer than 305 mm (12in.) in the feed direction require 210 mm (8.3in.) minimum •
measurement across the feed direction.
Non-standard papers shorter than 254 mm (10”) in the cross-feed direction require 330 mm (13”) minimum •
measurement in the feed direction.
Electrical
100V to 240V
Frequency: 50/60 Hz
Temperature and humidity
10 to 32°C, 15 to 85RH
50 to 90°F, 15 to 85RH
Downloaded From ManualsPrinter.com Manuals
To Next Page
Loading...
Need help?
General
