User Guide 3-1
Storage and Handling of Paper and Media
Storing paper stock
Paper
Store in a low humidity area. Damp paper may cause paper jams or poor image quality.•
Do not open reams of paper until they are required for use. The ream wrapper contains an inner lining that •
protects the paper from moisture.
Store on a flat surface to prevent the paper stock from folding or curling.•
Stack reams of paper carefully on top of one another to avoid crushing the edges. Do not stack more than five •
reams on top of each other.
It is important for optimum printing that paper stock is storedcorrectly. Take note of the following when storing paper
stock:
The User Interface (UI) screens shown in this guide may or may not reflect the screens displayed on your copier/printer.
The UI screens vary from system to system and from marketplace to marketplace. Therefore, the screens provided in
this guide are a representation of the type of screens that may be seen on your particular system.
This section describes the proper methods for storing and handling the various paper stocks and copy-media.
Note
Downloaded From ManualsPrinter.com Manuals
To Next Page
Loading...
Need help?
General
