8-15User Guide
Problem SolvingXerox 700 Digital Color Press
Li
ht Production C Finishe
1. Make sure that the machine has stopped before opening
the front cover of the finisher.
2. Pull out the Staple Cartridge.
After removing the staple cartridge, check the inside of
the finisher for any remaining staples.
3. Open the staple cartridge cover and remove the jammed
staple.
If the jammed staple cannot be removed, push the
staple in the direction indicated by arrow.
4. Return the staple cartridge to its original position until it
clicks into place.
Downloaded From ManualsPrinter.com Manuals
To Next Page
Loading...
